October 21, 2021, 05:46:28 AM
HDBitchin, a Harley Davidson Forum
Cookie Settings

Author Topic: Just Added This  (Read 678 times)

0 Members and 1 Guest are viewing this topic.

March 21, 2021, 07:24:40 AM
Read 678 times
Offline

Nowhereman

Supporting Member
As some of you know, I just purchased a new truck.
I've been adding little things here and there as most guys do and I just added this.
I then started to wonder how I would mount this little thing into a bike or jacket or vest.
- Nowhereman

March 23, 2021, 01:00:28 PM
Reply #1
Offline

bc45

Global Moderator
I have seen those advertised, Let us know how it works.

March 24, 2021, 06:49:50 AM
Reply #2
Offline

Nowhereman

Supporting Member
For my truck, I added it into the console where the holster was.
Instead of drilling four holes into the console which is not that thick, I used heavy duty velcro attachment on the back of the magnet to the inside of the console.
What makes this far nicer in my eyes is that the magnet will hold the gun in any position you want as long as it's steel.
If for some unknown reason you need to remove any semblence of a weapon holder, (hehehe) you just grab the magplate out quickly by tearing it away.
Boom, box stock again....
Ill add a second one under the dash neext to the parking brake; ya never know when some "wild critter" attempts to do harm to your way of life.
- Nowhereman

March 24, 2021, 05:10:41 PM
Reply #3
Offline

Nowhereman

Supporting Member
Here's a pic. Installed at correct angle for my hand to drop onto.
As you grab it becomes a sheering move, not straight pull so the amount of weight against the Velcro is minimal.
The gun breaks away from the magnet real cleanly.
Only the upper slide area is magnetic as the frame is Poly so it breaks away very nicely. £~¥
- Nowhereman
Like Like x 2 View List

July 07, 2021, 06:01:17 AM
Reply #4
Offline

Nowhereman

Supporting Member
Since last post here in this thread, I have added TWO Kel Tec KS7s to my inventory.
One is set up with it's supplied carry hanndle but, I added a laser dot and tac flashlight to it.
The other has handle removed so I could install a few Picatinny rails.
Those rails hold a laser dot, optical reticle at 3 moa that has cross hairs, dots and brakets in green or red.
A very light shot gun that is very short in length. Your can turn quickly in a hallway without worry of banging into walls.
I consider these puppies very good self defense weapons.
They can handle 3 inch all the way down to 1.5 inch shells which will double the capacity.
Wife likes the 1.5 inch shells as she can nicely handle the kick.
I installed butt extention pads and muzzle brakes on both to reduce felt recoil by 50%.
I like the addtional stock length for me as I have long arms and the brake and butt pad add 2.5 inches in total length.
Mine are black.
2020 shotgun of the year.
I have been looking for them but they are near impossible to find in CA.
Got a call from a gun shop saying they had a pair come in and would I like one.
I said no, I'll buy both and did.
- Nowhereman
Like Like x 3 View List

July 07, 2021, 01:05:57 PM
Reply #5
Offline

Rider Ron

Supporting Member
Very nice.
USArmy War College '68-70, AMA, IB 1K, 2015 SR Run For The Wall FNG
Agree Agree x 1 View List

July 07, 2021, 10:47:51 PM
Reply #6
Offline

bc45

Global Moderator
Nice 

July 08, 2021, 10:49:11 AM
Reply #7
Offline

HDBitchin

Administrator
Very very nice!
HDBitchin aka Tank

When shopping for anything look for Made in the USA and save American jobs and families


July 09, 2021, 06:17:10 AM
Reply #8
Offline

Nowhereman

Supporting Member
I couldn't resist.
Store had two Springfield XD Sub - Compact 9mms w/ 3 inch barrel.
10 + 1 rounds for CA.
I bought one yesterday.
Will pick up in ten days as usual.
- Nowhereman
Like Like x 2 View List

July 14, 2021, 10:23:29 PM
Reply #9
Offline

bc45

Global Moderator
Nice

October 12, 2021, 08:54:16 AM
Reply #10
Offline

Nowhereman

Supporting Member
Had the chance to grab two Keltecs and do some work to them.
This is the result. Both set up differently but, serve the same purpose.
- Nowhereman
Like Like x 1 View List

October 12, 2021, 09:10:19 AM
Reply #11
Offline

Nowhereman

Supporting Member
My semi auto family.
SA XD 45 acp
SA XDs 9mm sub compact
FMK 9mm
Randall Raider stainless 45 acp
- Nowhereman
Like Like x 1 View List

October 12, 2021, 04:17:59 PM
Reply #12
Offline

bc45

Global Moderator
Nice collection.

October 12, 2021, 07:31:46 PM
Reply #13
Offline

HDBitchin

Administrator
Nice collection.
Yes it is. Very nice hardware @Nowhereman
HDBitchin aka Tank

When shopping for anything look for Made in the USA and save American jobs and families


October 13, 2021, 02:03:07 PM
Reply #14
Offline

WantMore

Supporting Member
Nice firepower!!
Smoke em if you got em

 




The Harley-Davidson names and logos are Trademarks owned by Harley-Davidson, Inc. This site is not affiliated with Harley-Davidson.
All trademarks are the property of their respective owners and may be registered marks in some countries. There is no affiliation or endorsement claim, express or implied, made by their use.
All artwork in the HDBitchin logos including "Popeye" our Harley riding and forum surfing mascot is artwork that is © of HDBitchin
© HDBitchin, a HD Forum 2013 - 2021 All rights reserved.


HDBitchin is a web property of Tank Oils, an Independent AMSOIL Dealer