August 15, 2018, 11:32:37 AM
HDBitchin, a Harley Davidson Forum
Cookie Settings

Author Topic: Rear wheel swap  (Read 241 times)

0 Members and 1 Guest are viewing this topic.

February 12, 2018, 02:10:16 PM
Read 241 times
Offline

kihei john


Received a 2007 solid rear wheel from a sportster  with 3/4 in. Bearing. Would like to install on my 1990 fxst.  Could use some help on this install as for what will be needed for the swap.
 Thank you🤙🤙

Sent from my SM-G925V using Tapatalk


February 12, 2018, 02:41:46 PM
Reply #1
Offline

maniacmac

Global Moderator
Your current axle is 3/4 inch the 2007 xl axle is 25mm. There are several spacer kits available to reduce your 25mm bearing to 3/4 bearings.
You stated your sportster wheel has 3/4 inch bearings which is the same as your 1997fxst. May not need anything
CARS SUCK!


 



The Harley-Davidson names and logos are Trademarks owned by Harley-Davidson, Inc. This site is not affiliated with Harley-Davidson.
All trademarks are the property of their respective owners and may be registered marks in some countries. There is no affiliation or endorsement claim, express or implied, made by their use.
All artwork in the HDBitchin logos including "Popeye" our Harley riding and forum surfing mascot is artwork that is © of HDBitchin
© HDBitchin, a HD Forum 2013 - 2018 All rights reserved.